Technische Zeichnungen und CAD-Modelle zu optischen Messsystemen
Optische Messsysteme in geschlossener Bauweise
FORTiS-S Messsysteme
- CAD model: FORTiS-S ML=140 mm [gen]
- CAD model: FORTiS-S ML=240 mm [gen]
- CAD model: FORTiS-S ML=340 mm [gen]
- CAD model: FORTiS-S ML=440 mm [gen]
- CAD model: FORTiS-S ML=540 mm [gen]
- CAD model: FORTiS-S ML=640 mm [gen]
- CAD model: FORTiS-S ML=740 mm [gen]
- CAD model: FORTiS-S ML=840 mm [gen]
- CAD model: FORTiS-S ML=940 mm [gen]
- CAD model: FORTiS-S ML=1040 mm [gen]
- CAD model: FORTiS-S ML=1140 mm [gen]
- CAD model: FORTiS-S ML=1240 mm [gen]
- CAD model: FORTiS-S ML=1340 mm [gen]
- CAD model: FORTiS-S ML=1440 mm [gen]
- CAD model: FORTiS-S ML=1540 mm [gen]
- CAD model: FORTiS-S ML=1640 mm [gen]
- CAD model: FORTiS-S ML=1740 mm [gen]
- CAD model: FORTiS-S ML=1840 mm [gen]
- CAD model: FORTiS-S ML=2040 mm [gen]
- CAD model: FORTiS-S ML=2240 mm [gen]
- CAD model: FORTiS-S ML=2440 mm [gen]
- CAD model: FORTiS-S ML=2640 mm [gen]
- CAD model: FORTiS-S ML=2840 mm [gen]
- CAD model: FORTiS-S ML=3040 mm [gen]
FORTiS-N Messsystem – Standard-Endkappen
- CAD model: FORTiS-N ML=70 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=120 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=170 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=220 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=270 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=320 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=370 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=420 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=470 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=520 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=570 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=620 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=670 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=720 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=770 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=820 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=920 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1020 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1140 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1240 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1340 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1440 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1540 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1640 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1740 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=1840 mm, standard end caps [gen]
- CAD model: FORTiS-N ML=2040 mm, standard end caps [gen]
FORTiS-N Messsystem – kurze Endkappen
- CAD model: FORTiS-N ML=70 mm, short end caps [gen]
- CAD model: FORTiS-N ML=120 mm, short end caps [gen]
- CAD model: FORTiS-N ML=170 mm, short end caps [gen]
- CAD model: FORTiS-N ML=220 mm, short end caps [gen]
- CAD model: FORTiS-N ML=270 mm, short end caps [gen]
- CAD model: FORTiS-N ML=320 mm, short end caps [gen]
- CAD model: FORTiS-N ML=370 mm, short end caps [gen]
- CAD model: FORTiS-N ML=420 mm, short end caps [gen]
- CAD model: FORTiS-N ML=470 mm, short end caps [gen]
- CAD model: FORTiS-N ML=520 mm, short end caps [gen]
- CAD model: FORTiS-N ML=570 mm, short end caps [gen]
- CAD model: FORTiS-N ML=620 mm, short end caps [gen]
- CAD model: FORTiS-N ML=670 mm, short end caps [gen]
- CAD model: FORTiS-N ML=720 mm, short end caps [gen]
- CAD model: FORTiS-N ML=770 mm, short end caps [gen]
- CAD model: FORTiS-N ML=820 mm, short end caps [gen]
- CAD model: FORTiS-N ML=920 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1020 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1140 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1240 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1340 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1440 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1540 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1640 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1740 mm, short end caps [gen]
- CAD model: FORTiS-N ML=1840 mm, short end caps [gen]
- CAD model: FORTiS-N ML=2040 mm, short end caps [gen]
FORTiS-N Messsystem – kurze Endkappen und Ausgleichsschienen
- CAD model: FORTiS-N ML=70 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=120 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=170 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=220 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=270 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=320 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=370 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=420 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=470 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=520 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=570 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=620 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=670 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=720 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=770 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=820 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=920 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1020 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1140 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1240 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1340 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1440 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1540 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1640 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1740 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=1840 mm, short end caps, fitted to mounting spar [gen]
- CAD model: FORTiS-N ML=2040 mm, short end caps, fitted to mounting spar [gen]
Ausgleichsschienen
- CAD model: 70 mm mounting spar for FORTiS-N [gen]
- CAD model: 120 mm mounting spar for FORTiS-N [gen]
- CAD model: 170 mm mounting spar for FORTiS-N [gen]
- CAD model: 220 mm mounting spar for FORTiS-N [gen]
- CAD model: 270 mm mounting spar for FORTiS-N [gen]
- CAD model: 320 mm mounting spar for FORTiS-N [gen]
- CAD model: 370 mm mounting spar for FORTiS-N [gen]
- CAD model: 420 mm mounting spar for FORTiS-N [gen]
- CAD model: 470 mm mounting spar for FORTiS-N [gen]
- CAD model: 520 mm mounting spar for FORTiS-N [gen]
- CAD model: 570 mm mounting spar for FORTiS-N [gen]
- CAD model: 620 mm mounting spar for FORTiS-N [gen]
- CAD model: 670 mm mounting spar for FORTiS-N [gen]
- CAD model: 720 mm mounting spar for FORTiS-N [gen]
- CAD model: 770 mm mounting spar for FORTiS-N [gen]
- CAD model: 820 mm mounting spar for FORTiS-N [gen]
- CAD model: 920 mm mounting spar for FORTiS-N [gen]
- CAD model: 1020 mm mounting spar for FORTiS-N [gen]
- CAD model: 1140 mm mounting spar for FORTiS-N [gen]
- CAD model: 1240 mm mounting spar for FORTiS-N [gen]
- CAD model: 1340 mm mounting spar for FORTiS-N [gen]
- CAD model: 1440 mm mounting spar for FORTiS-N [gen]
- CAD model: 1540 mm mounting spar for FORTiS-N [gen]
- CAD model: 1640 mm mounting spar for FORTiS-N [gen]
- CAD model: 1740 mm mounting spar for FORTiS-N [gen]
- CAD model: 1840 mm mounting spar for FORTiS-N [gen]
- CAD model: 2040 mm mounting spar for FORTiS-N [gen]
Zubehör
- CAD model: DRIVE-CLiQ interface - single readhead input [gen]
- CAD model: Advanced Diagnostic Tool ADTa-100 [gen]
- CAD model: FORTiS air filter full size [gen]
- CAD model: FORTiS air filter reduced size [gen]
- CAD model: FORTiS air inlet universal elbow [gen]
- CAD model: FORTiS air inlet 180 degree turn [gen]
- CAD model: FORTiS air inlet fitting standard [gen]
Optische Messsysteme in offener Ausführung
RESOLUTE™ Absolut-Messsysteme
- CAD model: RESOLUTE™ absolute optical encoder (Side cable outlet) [gen]
- CAD model: RESOLUTE™ absolute optical encoder [gen]
- CAD model: DRIVE-CLiQ interface - single readhead input [gen]
- CAD model: DRIVE-CLiQ interface - dual readhead input [gen]
- CAD model: Advanced Diagnostic Tool ADTa-100 [gen]
- CAD model: RESx 52 mm A section ring [gen]
- CAD model: RESx 57 mm A section ring [gen]
- CAD model: RESx 75 mm A section ring [gen]
- CAD model: RESx 100 mm A section ring [gen]
- CAD model: RESx 101 mm A section ring [gen]
- CAD model: RESx 103 mm A section ring [gen]
- CAD model: RESx 104 mm A section ring [gen]
- CAD model: RESx 115 mm A section ring [gen]
- CAD model: RESx 124 mm A section ring [gen]
- CAD model: RESx 150 mm A section ring [gen]
- CAD model: RESx 172 mm A section ring [gen]
- CAD model: RESx 183 mm A section ring [gen]
- CAD model: RESx 200 mm A section ring [gen]
- CAD model: RESx 206 mm A section ring [gen]
- CAD model: RESx 209 mm A section ring [gen]
- CAD model: RESx 229 mm A section ring [gen]
- CAD model: RESx 255 mm A section ring [gen]
- CAD model: RESx 300 mm A section ring [gen]
- CAD model: RESx 330 mm A section ring [gen]
- CAD model: RESx 350 mm A section ring [gen]
- CAD model: RESx 413 mm A section ring [gen]
- CAD model: RESx 417 mm A section ring [gen]
- CAD model: RESx 489 mm A section ring [gen]
- CAD model: RESx 550 mm A section ring [gen]
- CAD model: RESx 52 mm B section ring [gen]
- CAD model: RESx 57 mm B section ring [gen]
- CAD model: RESx 75 mm B section ring [gen]
- CAD model: RESx 100 mm B section ring [gen]
- CAD model: RESx 115 mm B section ring [gen]
- CAD model: RESx 150 mm B section ring [gen]
- CAD model: RESx 165 mm B section ring [gen]
- CAD model: RESx 200 mm B section ring [gen]
- CAD model: REXx 52 mm ring [gen]
- CAD model: REXx 57 mm ring [gen]
- CAD model: REXx 75 mm ring [gen]
- CAD model: REXx 100 mm ring [gen]
- CAD model: REXx 103 mm ring [gen]
- CAD model: REXx 104 mm ring [gen]
- CAD model: REXx 115 mm ring [gen]
- CAD model: REXx 150 mm ring [gen]
- CAD model: REXx 183 mm ring [gen]
- CAD model: REXx 200 mm ring [gen]
- CAD model: REXx 206 mm ring [gen]
- CAD model: REXx 209 mm ring [gen]
- CAD model: REXx 229 mm ring [gen]
- CAD model: REXx 255 mm ring [gen]
- CAD model: REXx 300 mm ring [gen]
- CAD model: REXx 350 mm ring [gen]
- CAD model: REXx 417 mm ring [gen]
- CAD model: RTLx adhesive clamp [gen]
EVOLUTE™ Absolut-Messsysteme
- CAD model: EVOLUTE™ readhead (no cable) [gen]
- CAD model: Advanced Diagnostic Tool ADTa-100 [gen]
- CAD model: RTLA50 scale 120 mm [gen]
- CAD model: FASTRACK™ scale 125 mm [gen]
- CAD model: RTLx adhesive clamp [gen]
- CAD model: DRIVE-CLiQ interface - single readhead input [gen]
- CAD model: Advanced Diagnostic Tool ADTa-100 [gen]
QUANTiC™ inkrementelle Messsysteme
- CAD model: QUANTiC™ readhead [gen]
- CAD model: Advanced Diagnostic Tool ADTi-100 [gen]
- CAD model: P limit selector [gen]
- CAD model: Q limit/reference mark selector [gen]
- CAD model: FASTRACK™ scale 1200 mm [gen]
- CAD model: FASTRACK scale end cover [gen]
- CAD model: RTLC40 1200 mm [gen]
- CAD model: RTLC mechanical clamp [gen]
- CAD model: RTLx adhesive clamp [gen]
- CAD model: RTLx-S end cover [gen]
- CAD model: Narrow adaptor bracket [gen]
- CAD model: RESx 300 mm A section ring [gen]
- CAD model: Wide adaptor bracket [gen]
- CAD model: RESx 52 mm A section ring [gen]
- CAD model: RESx 57 mm A section ring [gen]
- CAD model: RESx 75 mm A section ring [gen]
- CAD model: RESx 100 mm A section ring [gen]
- CAD model: RESx 101 mm A section ring [gen]
- CAD model: RESx 103 mm A section ring [gen]
- CAD model: RESx 104 mm A section ring [gen]
- CAD model: RESx 115 mm A section ring [gen]
- CAD model: RESx 124 mm A section ring [gen]
- CAD model: RESx 150 mm A section ring [gen]
- CAD model: RESx 172 mm A section ring [gen]
- CAD model: RESx 183 mm A section ring [gen]
- CAD model: RESx 200 mm A section ring [gen]
- CAD model: RESx 206 mm A section ring [gen]
- CAD model: RESx 209 mm A section ring [gen]
- CAD model: RESx 229 mm A section ring [gen]
- CAD model: RESx 255 mm A section ring [gen]
- CAD model: RESx 300 mm A section ring [gen]
- CAD model: RESx 330 mm A section ring [gen]
- CAD model: RESx 350 mm A section ring [gen]
- CAD model: RESx 413 mm A section ring [gen]
- CAD model: RESx 417 mm A section ring [gen]
- CAD model: RESx 489 mm A section ring [gen]
- CAD model: RESx 550 mm A section ring [gen]
- CAD model: RESx 52 mm B section ring [gen]
- CAD model: RESx 57 mm B section ring [gen]
- CAD model: RESx 75 mm B section ring [gen]
- CAD model: RESx 100 mm B section ring [gen]
- CAD model: RESx 115 mm B section ring [gen]
- CAD model: RESx 150 mm B section ring [gen]
- CAD model: RESx 165 mm B section ring [gen]
- CAD model: RESx 200 mm B section ring [gen]
TONiC™ inkrementelle Messsysteme
- CAD model: TONiC™ readhead [gen]
- CAD model: Ti interface [gen]
- CAD model: DSi (Dual Signal Interface) [gen]
- CAD model: TONiC™ interboard connector PCB [gen]
- CAD model: P limit selector [gen]
- CAD model: Q limit/reference mark selector [gen]
- CAD model: TONiC interface bracket [gen]
- CAD model: RESx 52 mm A section ring [gen]
- CAD model: RESx 57 mm A section ring [gen]
- CAD model: RESx 75 mm A section ring [gen]
- CAD model: RESx 100 mm A section ring [gen]
- CAD model: RESx 101 mm A section ring [gen]
- CAD model: RESx 103 mm A section ring [gen]
- CAD model: RESx 104 mm A section ring [gen]
- CAD model: RESx 115 mm A section ring [gen]
- CAD model: RESx 124 mm A section ring [gen]
- CAD model: RESx 150 mm A section ring [gen]
- CAD model: RESx 172 mm A section ring [gen]
- CAD model: RESx 183 mm A section ring [gen]
- CAD model: RESx 200 mm A section ring [gen]
- CAD model: RESx 206 mm A section ring [gen]
- CAD model: RESx 209 mm A section ring [gen]
- CAD model: RESx 229 mm A section ring [gen]
- CAD model: RESx 255 mm A section ring [gen]
- CAD model: RESx 300 mm A section ring [gen]
- CAD model: RESx 330 mm A section ring [gen]
- CAD model: RESx 350 mm A section ring [gen]
- CAD model: RESx 413 mm A section ring [gen]
- CAD model: RESx 417 mm A section ring [gen]
- CAD model: RESx 489 mm A section ring [gen]
- CAD model: RESx 550 mm A section ring [gen]
- CAD model: RESx 52 mm B section ring [gen]
- CAD model: RESx 57 mm B section ring [gen]
- CAD model: RESx 75 mm B section ring [gen]
- CAD model: RESx 100 mm B section ring [gen]
- CAD model: RESx 115 mm B section ring [gen]
- CAD model: RESx 150 mm B section ring [gen]
- CAD model: RESx 165 mm B section ring [gen]
- CAD model: RESx 200 mm B section ring [gen]
- CAD model: REXx 52 mm ring [gen]
- CAD model: REXx 57 mm ring [gen]
- CAD model: REXx 75 mm ring [gen]
- CAD model: REXx 100 mm ring [gen]
- CAD model: REXx 103 mm ring [gen]
- CAD model: REXx 104 mm ring [gen]
- CAD model: REXx 115 mm ring [gen]
- CAD model: REXx 150 mm ring [gen]
- CAD model: REXx 183 mm ring [gen]
- CAD model: REXx 200 mm ring [gen]
- CAD model: REXx 206 mm ring [gen]
- CAD model: REXx 209 mm ring [gen]
- CAD model: REXx 229 mm ring [gen]
- CAD model: REXx 255 mm ring [gen]
- CAD model: REXx 300 mm ring [gen]
- CAD model: REXx 350 mm ring [gen]
- CAD model: REXx 417 mm ring [gen]
- CAD model: RTLx adhesive clamp [gen]
- CAD model: Narrow adaptor bracket [gen]
- CAD model: Wide adaptor bracket [gen]
VIONiC™ inkrementelle Messsysteme
- CAD model: VIONiC™ readhead [gen]
- CAD model: Advanced Diagnostic Tool ADTi-100 [gen]
- CAD model: DSi (Dual Signal Interface) [gen]
- CAD model: P limit selector [gen]
- CAD model: Q limit/reference mark selector [gen]
- CAD model: RESx 52 mm A section ring [gen]
- CAD model: RESx 57 mm A section ring [gen]
- CAD model: RESx 75 mm A section ring [gen]
- CAD model: RESx 100 mm A section ring [gen]
- CAD model: RESx 101 mm A section ring [gen]
- CAD model: RESx 103 mm A section ring [gen]
- CAD model: RESx 104 mm A section ring [gen]
- CAD model: RESx 115 mm A section ring [gen]
- CAD model: RESx 124 mm A section ring [gen]
- CAD model: RESx 150 mm A section ring [gen]
- CAD model: RESx 172 mm A section ring [gen]
- CAD model: RESx 183 mm A section ring [gen]
- CAD model: RESx 200 mm A section ring [gen]
- CAD model: RESx 206 mm A section ring [gen]
- CAD model: RESx 209 mm A section ring [gen]
- CAD model: RESx 229 mm A section ring [gen]
- CAD model: RESx 255 mm A section ring [gen]
- CAD model: RESx 300 mm A section ring [gen]
- CAD model: RESx 330 mm A section ring [gen]
- CAD model: RESx 350 mm A section ring [gen]
- CAD model: RESx 413 mm A section ring [gen]
- CAD model: RESx 417 mm A section ring [gen]
- CAD model: RESx 489 mm A section ring [gen]
- CAD model: RESx 550 mm A section ring [gen]
- CAD model: RESx 52 mm B section ring [gen]
- CAD model: RESx 57 mm B section ring [gen]
- CAD model: RESx 75 mm B section ring [gen]
- CAD model: RESx 100 mm B section ring [gen]
- CAD model: RESx 115 mm B section ring [gen]
- CAD model: RESx 150 mm B section ring [gen]
- CAD model: RESx 165 mm B section ring [gen]
- CAD model: RESx 200 mm B section ring [gen]
- CAD model: REXx 52 mm ring [gen]
- CAD model: REXx 57 mm ring [gen]
- CAD model: REXx 75 mm ring [gen]
- CAD model: REXx 100 mm ring [gen]
- CAD model: REXx 103 mm ring [gen]
- CAD model: REXx 104 mm ring [gen]
- CAD model: REXx 115 mm ring [gen]
- CAD model: REXx 150 mm ring [gen]
- CAD model: REXx 183 mm ring [gen]
- CAD model: REXx 200 mm ring [gen]
- CAD model: REXx 206 mm ring [gen]
- CAD model: REXx 209 mm ring [gen]
- CAD model: REXx 229 mm ring [gen]
- CAD model: REXx 255 mm ring [gen]
- CAD model: REXx 300 mm ring [gen]
- CAD model: REXx 350 mm ring [gen]
- CAD model: REXx 417 mm ring [gen]
- CAD model: RTLx adhesive clamp [gen]
- CAD model: Narrow adaptor bracket [gen]
- CAD model: Wide adaptor bracket [gen]
ATOM™ inkrementelle Messsysteme
- CAD model: ATOM DX™ 20 µm cabled [gen]
- CAD model: ATOM DX™ 20 µm top exit [gen]
- CAD model: ATOM DX™ 40 µm cabled [gen]
- CAD model: ATOM DX™ 40 µm top exit [gen]
- CAD model: Advanced Diagnostic Tool ADTi-100 [gen]
- CAD model: RTLx adhesive clamp [gen]
- CAD model: ATOM DX 20 µm, RTLF [gen]
- CAD model: ATOM DX 40 µm, RTLF [gen]
- CAD model: ATOM DX 20 µm, 18 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 18 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 30 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 30 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 55 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 55 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 80 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 80 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 100 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 100 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 105 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 105 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 130 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 20 µm, 130 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 18 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 18 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 30 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 30 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 55 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 55 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 80 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 80 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 100 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 100 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 105 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 105 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 40 µm, 130 mm RCLC, centre reference mark [gen]
- CAD model: ATOM DX 40 µm, 130 mm RCLC, end reference mark [gen]
- CAD model: ATOM DX 20 µm, 30 mm RCDM disc [gen]
- CAD model: ATOM DX 20 µm, 36 mm RCDM disc [gen]
- CAD model: ATOM DX 20 µm, 50 mm RCDM disc [gen]
- CAD model: ATOM DX 20 µm, 56 mm RCDM disc [gen]
- CAD model: ATOM DX 20 µm, 68 mm RCDM disc [gen]
- CAD model: ATOM DX 20 µm, 108 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 17 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 20 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 25 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 27 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 30 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 36 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 50 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 56 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 68 mm RCDM disc [gen]
- CAD model: ATOM DX 40 µm, 108 mm RCDM disc [gen]
- CAD model: ATOM DX CSF40 56 OD, 24.5 ID, 3860 LC, bolted, external ref mark [gen]
- CAD model: ATOM DX CSF40 88 OD, 56.5 ID, 6360 LC, bolted, external ref mark [gen]
- CAD model: ATOM DX CSF40 120 OD, 88.5 ID, 8880 LC, bolted, external ref mark [gen]
ATOM™ inkrementelle Messsysteme
- CAD model: ATOM 20um cabled [gen]
- CAD model: ATOM 20um FPC [gen]
- CAD model: ATOM 40um cabled [gen]
- CAD model: ATOM 40um FPC [gen]
- CAD model: ATOM 20um, RTLF [gen]
- CAD model: ATOM 40um, RTLF [gen]
- CAD model: ATOM 20um, 18mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 18mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 30mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 30mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 55mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 55mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 80mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 80mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 100mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 100mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 105mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 105mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 130mm RCLC, end reference mark [gen]
- CAD model: ATOM 20um, 130mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 18mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 18mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 30mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 30mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 55mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 55mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 80mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 80mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 100mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 100mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 105mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 105mm RCLC, centre reference mark [gen]
- CAD model: ATOM 40um, 130mm RCLC, end reference mark [gen]
- CAD model: ATOM 40um, 130mm RCLC, centre reference mark [gen]
- CAD model: ATOM 20um, 30mm disc [gen]
- CAD model: ATOM 20um, 36mm disc [gen]
- CAD model: ATOM 20um, 50mm disc [gen]
- CAD model: ATOM 20um, 56mm disc [gen]
- CAD model: ATOM 20um, 68mm disc [gen]
- CAD model: ATOM 20um, 108mm disc [gen]
- CAD model: ATOM 40um, 17mm disc [gen]
- CAD model: ATOM 40um, 20mm disc [gen]
- CAD model: ATOM 40um, 25mm disc [gen]
- CAD model: ATOM 40um, 27mm disc [gen]
- CAD model: ATOM 40um, 30mm disc [gen]
- CAD model: ATOM 40um, 36mm disc [gen]
- CAD model: ATOM 40um, 50mm disc [gen]
- CAD model: ATOM 40um, 56mm disc [gen]
- CAD model: ATOM 40um, 68mm disc [gen]
- CAD model: ATOM 40um, 108mm disc [gen]
- CAD model: ATOM cable interface connector [gen]
- CAD model: Ri interface [gen]
- CAD model: Ti interface [gen]
- CAD model: DSi (Dual Signal Interface) [gen]
- CAD model: ACi interface cabled variant [gen]
- CAD model: ACi interface FPC variant [gen]
- CAD model: ACi interface PCB mounting [gen]
- CAD model: ATOM Slim Applicator [gen]
- CAD model: ATOM Side Mount Applicator [gen]
- CAD model: ATOM L bracket [gen]
- CAD model: ATOM side mount bracket [gen]
- CAD model: RTLx adhesive clamp [gen]