Installations- und Benutzerhandbücher als Download

5-Achsen-Messtechnik

• Broschüre: REVO-2 und RSP2 Messtaster
  

  Broschüre: REVO-2 und RSP2 Messtaster

  REVO-2 ist ein dynamisches Messsystem zur Maximierung des Messdurchsatzes, bei gleichzeitiger Aufrechterhaltung höchster Systemgenauigkeit. REVO-2 ist das einzige Scan-System für KMGs, das die Bewegung von drei Maschinen- und zwei Messkopfachsen gleichzeitig steuert und dabei über 2D und 3D taktile Messtaster, Oberflächenrauheits-Messtaster und jetzt auch über berührungslose optische Messtaster, Werkstückdaten erfasst.

  [358kB]
• Broschüre: RSP3-1 bis -4 Messtaster für REVO-2
  

  Broschüre: RSP3-1 bis -4 Messtaster für REVO-2

  Die RSP3 Messtasterreihe ermöglicht dem REVO-2 System die Aufnahme abgewinkelter Tastereinsatzkonfigurationen unter Beibehaltung einer optimalen Messleistung.

  [267kB]
• Flyer: RSP3-6 extended reach probe [en]
  

  Flyer: RSP3-6 extended reach probe

  The RSP3-6 provides enhanced capability for accessing deep bores and inspecting features within large parts. It is available with a range of stylus holders for applications requiring straight and cranked extensions and can be used for both touch-trigger and 2D scanning applications.

  [420kB]
• Broschüre: RVP - optischer Messsensor für REVO-2
  

  Broschüre: RVP - optischer Messsensor für REVO-2

  Der optische Messsensor (RVP) für das REVO System ermöglicht berührungslose, optische Messungen auf einer unbegrenzten 5-Achsen Positionierplattform. Taktiles Hochgeschwindigkeits-Scanning, Rauheitsmessungen und berührungslose Prüfungen können jetzt alle auf ein und demselben Koordinatenmessgerät ausgeführt werden.

  [526kB]
• Flyer: RFP1 fringe probe for REVO-2 [en]
  

  Flyer: RFP1 fringe probe for REVO-2

  REVO-2 is the only scanning system for CMMs that simultaneously controls the motion of three machine and two head axes whilst collecting work piece data using its range of 2D and 3D tactile probes, surface roughness measurement probe, non-contact vision probe and now structured light probe too.

  [278kB]
• Flyer: SFP2 surface finish probe [en]
  

  Flyer: SFP2 surface finish probe

  No description available

  [261kB]
• Datenblatt: SFM-A1
  

  Datenblatt: SFM-A1

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [176kB]
• Datenblatt: SFM-A2
  

  Datenblatt: SFM-A2

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [199kB]
• Datenblatt: SFM-B1
  

  Datenblatt: SFM-B1

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [165kB]
• Datenblatt: SFM-B2
  

  Datenblatt: SFM-B2

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [205kB]
• Datenblatt: SFM-B3
  

  Datenblatt: SFM-B3

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [166kB]
• Datenblatt: SFM-B4
  

  Datenblatt: SFM-B4

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [201kB]
• Datenblatt: SFM-B5
  

  Datenblatt: SFM-B5

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [191kB]
• Datenblatt: SFM-C3
  

  Datenblatt: SFM-C3

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [164kB]
• Datenblatt: SFM-D1
  

  Datenblatt: SFM-D1

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [165kB]
• Datenblatt: SFM-E1
  

  Datenblatt: SFM-E1

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [161kB]
• Datenblatt: SFM-E2
  

  Datenblatt: SFM-E2

  Erweiterter Zugang und Messkapazität für integrierte Rauheitsmessungen

  [164kB]
• Flyer: Calibration and capability artefacts for SFP2 surface finish probe [en]
  

  Flyer: Calibration and capability artefacts for SFP2 surface finish probe

  No description available

  [606kB]
• Datenblatt: PH20 Schaltkopf-System
  

  Datenblatt: PH20 Schaltkopf-System

  PH20 ist ein dynamischer Schaltkopf welcher einen dreimal höheren Messdurchsatz bei gleichbleibend hoher Systemgenauigkeit ermöglicht.

  [937kB]

• Benutzerhandbuch: REVO-2
  

  Benutzerhandbuch: REVO-2

  No description available

  [2.3MB]
• Installation & user's guide: RSP3 [en]
  

  Installation & user's guide: RSP3

  The RSP3 range of probes gives REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.5MB]
• User guide: RVP [en]
  

  User guide: RVP

  RVP is a non-contact vision measurement probe for use with the REVO-2 5-axis measurement system on co-ordinate measuring machines.

  [1.0MB]
• Benutzerhandbuch: RFP1
  

  Benutzerhandbuch: RFP1

  The REVO fringe probe (RFP1) is a non-contact structured light sensor for the REVO® system offering highly accurate measurement of surface topology on an infinite positioning, 5-axis CMM platform.

  [1.0MB]
• Installations- und Benutzerhandbücher: SFP2
  

  Installations- und Benutzerhandbücher: SFP2

  Das SFP2 Messsystem ermöglicht die Integration automatischer Rauheitsmessungen (Oberflächenrauheit) auf KMGs, die mit dem REVO Multisensor 5-Achsen-Messsystem bestückt sind.

  [1.4MB]
• Installations- und Benutzerhandbücher: PH20
  

  Installations- und Benutzerhandbücher: PH20

  No description available

  [1.5MB]

3-Achsen-Messtechnik

• Broschüre: Übersicht über die motorischen PH10 PLUS Dreh-/Schwenkköpfe
  

  Broschüre: Übersicht über die motorischen PH10 PLUS Dreh-/Schwenkköpfe

  Die motorischen Dreh-/Schwenkköpfe der Reihe PH10 PLUS steigern den Messdurchsatz, denn sie erlauben CNC-gesteuerten KMGs die programmgesteuerte wiederholgenaue Messtasterpositionierung. Dadurch können Merkmale aus verschiedenen Winkeln gemessen werden, ohne dass eine häufige, zeitaufwendige Änderung der Tastereinsatzkonfigurationen erforderlich ist.

  [545kB]
• Flyer: PH10M-iQ PLUS [en]
  

  Flyer: PH10M-iQ PLUS

  PH10M-iQ PLUS – Less time calibrating, more time measuring

  [591kB]
• Data sheet: AM2 adjustment module [en]
  

  Data sheet: AM2 adjustment module

  No description available

  [81kB]

• Installation & user's guide: PH10 PLUS [en]
  

  Installation & user's guide: PH10 PLUS

  Each of the heads in the PH10 PLUS motorised probe head range is a general purpose, versatile unit designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).

  [960kB]
• Installation & user's guide: PH10M-iQ PLUS [en]
  

  Installation & user's guide: PH10M-iQ PLUS

  PH10M-iQ PLUS is a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installation & user's guide: PHS-2 [en]
  

  Installation & user's guide: PHS-2

  PHS-2 is designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

  [3.2MB]

Manuelle Tastköpfe

• User guide: PH6M [en]
  

  User guide: PH6M

  No description available

  [361kB]
• Benutzerhandbuch: Manueller Dreh-/Schwenkkopf MIH
  

  Benutzerhandbuch: Manueller Dreh-/Schwenkkopf MIH

  H-1000-5201-07-A

  [424kB]
• Benutzerhandbuch: MH8
  

  Benutzerhandbuch: MH8

  The MH8 is a manually operated, indexing probe head that articulates to provide orientation of the stylus.

  [411kB]
• Installation & user's guide: MH20 and MH20i [en]
  

  Installation & user's guide: MH20 and MH20i

  Installation and user’s guide: MH20 and MH20i manual heads with TP20 probe module

  [533kB]
• User guide: RTP20 [en]
  

  User guide: RTP20

  No description available

  [554kB]

Messtaster zum Scannen

• Flyer: SP80 ultra-high accuracy scanning probe [en]
  

  Flyer: SP80 ultra-high accuracy scanning probe

  The SP80 quill mounted probe provides class-leading scanning performance, as well as the most flexible use of styli for maximum productivity.

  [267kB]

• Installation guide: SP25M [en]
  

  Installation guide: SP25M

  This document is intended as a guide to initial installation and integration of the Renishaw SP25M analogue scanning/measurement probe system.

  [1.2MB]
• Installation guide: SP80 and SP80H [en]
  

  Installation guide: SP80 and SP80H

  This installation and integration guide is intended to assist OEM and Renishaw personnel in the initial installation, integration and use of the Renishaw SP80 and SP80H ultra-high accuracy scanning probes. The SP80 and SP80H are quadrature output measurement probes that provide class-leading performance, as well as the most flexible use of styli for maximum productivity.

  [1.2MB]
• Benutzerhandbuch: SP80 und SP80H höchstpräzise Messtastersysteme zum Scannen
  

  Benutzerhandbuch: SP80 und SP80H höchstpräzise Messtastersysteme zum Scannen

  No description available

  [3.0MB]
• Installation & user's guide: SP600, SCR600 and AC1, AC2 [en]
  

  Installation & user's guide: SP600, SCR600 and AC1, AC2

  SP600M is an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.

  [887kB]

Berührend (taktil) schaltende Messtaster

• Benutzerhandbuch: Schaltende Messtaster-Systeme - TP1, TP2, TP6, TPA, PH1, PH5, PH6, PH6M
  

  Benutzerhandbuch: Schaltende Messtaster-Systeme - TP1, TP2, TP6, TPA, PH1, PH5, PH6, PH6M

  No description available

  [514kB]
• Benutzerhandbuch: TP20
  

  Benutzerhandbuch: TP20

  No description available

  [970kB]
• Benutzerhandbuch: TP200 Messtastersystem
  

  Benutzerhandbuch: TP200 Messtastersystem

  H-1000-5014-03-C

  [310kB]
• User instructions: TP20 and TP200 cleaning [en]
  

  User instructions: TP20 and TP200 cleaning

  How to effectively clean the location faces of TP20 and TP200.

  [139kB]
• User guide: TP7 high accuracy touch trigger probe system [en]
  

  User guide: TP7 high accuracy touch trigger probe system

  No description available

  [399kB]
• Brochure: Stylus selection guide: TP7M probe and stylus kit [en]
  

  Brochure: Stylus selection guide: TP7M probe and stylus kit

  No description available

  [132kB]
• Brochure: Stylus selection guide: TP7M stylus kit [en]
  

  Brochure: Stylus selection guide: TP7M stylus kit

  No description available

  [125kB]
• Benutzerhandbuch: Manuell indexierbarer Messtaster TP8
  

  Benutzerhandbuch: Manuell indexierbarer Messtaster TP8

  No description available

  [129kB]
• Installation & user's guide: NDI AUTOsense touch trigger module [en]
  

  Installation & user's guide: NDI AUTOsense touch trigger module

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]

Messtaster-Interfaceeinheiten

• Installation guide: PI 7-3 [en]
  

  Installation guide: PI 7-3

  The PI 7-3 is a dedicated signal conditioner for interfacing the TP7M series of probes or touch-trigger probe types such as TP2, TP20 or TP6 / TP6A, to the CMM controller.

  [865kB]
• Installation guide: PI 200-3 [en]
  

  Installation guide: PI 200-3

  No description available

  [1.3MB]
• Installation guide: IS1-2 [en]
  

  Installation guide: IS1-2

  This guide describes how the IS1-2 (interface selector) functions when used with multiple Renishaw probing systems. It gives information on physical installation, system connections and interface settings, as well as assistance in fault finding during the installation of a system.

  [648kB]

Maschinensteuerungen und Verstärker

• Installation guide: PHC10-3 PLUS [en]
  

  Installation guide: PHC10-3 PLUS

  This guide gives information on physical installation, system connections, communications and interface settings, as well as assistance in fault-finding during the installation of PHC10-3 PLUS.

  [918kB]
• Installation guide: UCC T3 PLUS and UCC S3 CMM controller [en]
  

  Installation guide: UCC T3 PLUS and UCC S3 CMM controller

  No description available

  [1.5MB]
• Installation guide: UCC T3-2 [en]
  

  Installation guide: UCC T3-2

  No description available

  [1.2MB]
• Installationshandbuch: UCC T5
  

  Installationshandbuch: UCC T5

  No description available

  [711kB]
• Installationshandbuch: UCC S5 REVO-2 KMG Steuerung Installationshandbuch
  

  Installationshandbuch: UCC S5 REVO-2 KMG Steuerung Installationshandbuch

  No description available

  [928kB]
• Installationshandbuch: UCC BI
  

  Installationshandbuch: UCC BI

  Die UCC BI wird für KMG Systeme benötigt, die mit bürstenlosen Motoren arbeiten. Die UCC BI ist die Schnittstelle zwischen der KMG Steuerung und dem SPA2‐2 ﴾der die bürstenlosen Motoren speist﴿.

  [1.2MB]
• Installation guide: UCC AI [en]
  

  Installation guide: UCC AI

  The UCC AI is required for large higher voltage CMM systems which may require motor voltages in excess of 80 V or motor currents in excess of 10 A.

  [917kB]
• Installation guide: UCC PI 80 [en]
  

  Installation guide: UCC PI 80

  The UCC PI 80 is required for CMM systems which are fitted with Renishaw's SP80 scanning probe and facilitates the use of the UCC S3 as the machine controller.

  [787kB]
• Installation guide: UCC daughtercards [en]
  

  Installation guide: UCC daughtercards

  There is a range of UCC daughtercards available each card offering additional capabilities to the standard UCC1 or UCC2 product.

  [1.5MB]
• Leaflet: UCC daughtercards [en]
  

  Leaflet: UCC daughtercards

  No description available

  [54kB]
• Installation & user's guide: Thermal effect compensation for UCC1 and UCC2 [en]
  

  Installation & user's guide: Thermal effect compensation for UCC1 and UCC2

  No description available

  [620kB]
• Installations- und Benutzerhandbücher: MCU
  

  Installations- und Benutzerhandbücher: MCU

  No description available

  [1.0MB]
• Leaflet: MCU docking plate [en]
  

  Leaflet: MCU docking plate

  No description available

  [113kB]
• Installations- und Benutzerhandbücher: MCU5-2 und MCU W-2
  

  Installations- und Benutzerhandbücher: MCU5-2 und MCU W-2

  No description available

  [779kB]
• User guide: HCU2 [en]
  

  User guide: HCU2

  No description available

  [224kB]
• Installation guide: SPAlite [en]
  

  Installation guide: SPAlite

  No description available

  [354kB]
• Installation guide: SPA2-2 [en]
  

  Installation guide: SPA2-2

  SPA2-2 servo power amplifier installation guide

  [1.9MB]
• Installation guide: SPA3 [en]
  

  Installation guide: SPA3

  SPA3 is a servo power amplifier with enhancements for higher power and category 2 E-STOP. The high power capability combined with a compact form enables use of the SPA3 across a wide range of machines.

  [1.6MB]
• Installation guide: SPA3-2 [en]
  

  Installation guide: SPA3-2

  No description available

  [1.5MB]
• Manual: Digital servo power amplifiers [en]
  

  Manual: Digital servo power amplifiers

  A publication to assist in the task of setting up the servo response of the CMM when fitted with either an SPA2 or SPAlite servo power amplifier.

  [1.9MB]
• User guide: Product interconnection system (PICS) [en]
  

  User guide: Product interconnection system (PICS)

  No description available

  [557kB]

Trägersysteme (Racks)

• Datenblatt: MSR1 - manuelles Modulwechselmagazin für TP20 und TP200 Messtastermodule
  

  Datenblatt: MSR1 - manuelles Modulwechselmagazin für TP20 und TP200 Messtastermodule

  H-1000-5039-01-A

  [137kB]
• Data sheet: MAPS manual autojoint probe stand [en]
  

  Data sheet: MAPS manual autojoint probe stand

  The Renishaw manual autojoint probe stand (MAPS) is a compact storage rack for up to six autojointed probe combinations.

  [1.0MB]
• Data sheet: TCR20 [en]
  

  Data sheet: TCR20

  TCR20 module change rack for PH20

  [417kB]

• User guide: Autochange system [en]
  

  User guide: Autochange system

  Renishaw’s ACR1 is a fully integrated 8 port probe exchange system. Mounted within the CMM’s working envelope, the autochange system facilitates fast, automatic probe exchange without the need for re-qualification of the probe assembly.

  [2.6MB]
• Installation guide: Autochange system [en]
  

  Installation guide: Autochange system

  Installation and programmer's guide for Renishaw's autochange system

  [3.5MB]
• Installation guide: ACR2 [en]
  

  Installation guide: ACR2

  No description available

  [1.1MB]
• Installations- und Benutzerhandbücher: ACR3
  

  Installations- und Benutzerhandbücher: ACR3

  No description available

  [1.2MB]
• Leaflet: ACR3 with powered port - power supply addendum [en]
  

  Leaflet: ACR3 with powered port - power supply addendum

  No description available

  [43kB]
• Leaflet: RCP repair kit [en]
  

  Leaflet: RCP repair kit

  No description available

  [309kB]
• Installations- und Benutzerhandbücher: MRS modulares Befestigungssystem
  

  Installations- und Benutzerhandbücher: MRS modulares Befestigungssystem

  MRS modulares Befestigungssystem

  [1.7MB]
• Leaflet: User's leaflet: MRS adjustable footplates [en]
  

  Leaflet: User's leaflet: MRS adjustable footplates

  The MRS rail can be placed at different heights from the CMM’s bed by using multiple MRS legs to provide the required clearance for long styli and extension bars. By using the optional MRS adjustable footplates shown below, the MRS rail can also be placed at different positions on the CMM’s bed thereby ensuring that a maximised working volume can be achieved.

  [56kB]
• Leaflet: User's leaflet: MRS heavy duty legs [en]
  

  Leaflet: User's leaflet: MRS heavy duty legs

  Where an MRS installation has numerous SCP80s containing heavy stylus arrangements, or vertical stylus arrangements exceeding 190 mm, it is recommended that the optional MRS heavy duty leg kits are used to provide additional rigidity/height. These kits can be purchased separately to match the number of legs used on the MRS.

  [89kB]
• Installation guide: MRS2 [gen]
  

  Installation guide: MRS2

  This guide provides detailed installation instructions for the Renishaw modular rack system (MRS2).

  [5.4MB]

Zubehör

• User guide: AM1 [en]
  

  User guide: AM1

  The AM1 adjustment module has been designed for use with the PH6M and MIH manual probe heads and the PH10T/M PLUS motorised probe heads.

  [159kB]
• User guide: MCG [en]
  

  User guide: MCG

  Renishaw’s machine checking gauge (MCG) provides an easy way to monitor the volumetric measurement performance of your co-ordinate measuring machine (CMM). The MCG is an effective complement to existing standards for CMM verifi cation and can be used as an interim checking gauge in accordance with international standards BS EN ISO 10360-2.

  [538kB]
• User guide: MCG tools [en]
  

  User guide: MCG tools

  MCG tools is an Microsoft Excel workbook that manages the machine checking gauge (MCG). MCG tools allows the user to generate a DMIS part program in order to execute the MCG test on a co-ordinate measuring machine (CMM). It can then import the MCG data to analyze and identify whether geometrical errors exist on the CMM. Also, the results from every MCG test can be archived in order to follow the evolution of the geometry of a CMM over time.

  [822kB]
• Kurzanleitung: Messen der Antastkraft mit der Federwaage
  

  Kurzanleitung: Messen der Antastkraft mit der Federwaage

  No description available

  [46kB]
• Installation guide: Universal calibration tower installation guide [en]
  

  Installation guide: Universal calibration tower installation guide

  No description available

  [1.9MB]

KMG Installationen

• Installations- und Benutzerhandbücher: Nachrüst-Steuerungsschrank
  

  Installations- und Benutzerhandbücher: Nachrüst-Steuerungsschrank

  Der Steuerungsschrank von Renishaw ist eine Standard 19”-Rack-Einheit, in der verschiedene Renishaw Steuerungen, Servoverstärker und Interfaces untergebracht werden können. Dieser Schrank bietet sowohl ein Lagersystem als auch ein einzigartiges Verbindungssystem hin zum KMG, wodurch eine saubere und ordentliche Installation möglich wird. Neben der Unterbringungsmöglichkeit für alle Renishaw-Geräte besitzt der Schrank ein integriertes Netzsystem mit Ein/Aus-Schalter.

  [528kB]
• Installation guide: Assembly instructions: Retrofit desk [en]
  

  Installation guide: Assembly instructions: Retrofit desk

  Assembly instructions for cabinet mounted and stand alone retrofit desk

  [1.8MB]
• Manual: Switch and connector guide: Renishaw CMM products [en]
  

  Manual: Switch and connector guide: Renishaw CMM products

  This guide contains information on switches, connectors and signals of conventional Renishaw interfaces and controllers. It is of particular use to engineers involved in installation, support or upgrade activities associated with Renishaw CMM products.

  [1.4MB]
• Reference guide: CMM cables [en]
  

  Reference guide: CMM cables

  This guide contains comprehensive information on the most commonly used Renishaw cables. It is of particular use to engineers involved in installation or support of Renishaw equipment on CMMs, or where correct cable identification is required.

  [2.0MB]
• Leaflet: Upgrade brackets and blanking plates [en]
  

  Leaflet: Upgrade brackets and blanking plates

  This leaflet details the bracket options available when upgrading or replacing Renishaw controllers and / or probe interfaces. By using a combination of the following brackets and / or blanking panels, any combination of existing and new Renishaw product can be mounted together inside a 19 inch cabinet rack. The bracket kits shown in this leaflet are supplied with all the necessary fixtures.

  [147kB]